Posted on

Kingston PC3 10600 DDR3 1333

 

SPECIFICATION:

JEDEC standard 1.5V ± 0.075V

Power Supply 667MHz fCK for 1333Mb/sec/pin
8 independent internal bank
Programmable CAS Latency: 6,7,8,9
Posted CAS
Programmable Additive Latency: 0, CL – 2, or CL – 1 clock
Programmable CAS Write Latency(CWL) = 9(DDR3-1333)
8-bit pre-fetch
Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
Bi-directional Differential Data Strobe
Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
On Die Termination using ODT pin
Average Refresh Period 7.8us at lower then TCASE 85°C, 3.9us at 85°C < TCASE . 95°C
Asynchronous Reset
PCB : Height 1.180” (30.00mm), double sided componen

 

Advertisements

Tinggalkan Jawapan

Masukkan butiran anda dibawah atau klik ikon untuk log masuk akaun:

WordPress.com Logo

Anda sedang menulis komen melalui akaun WordPress.com anda. Log Out / Tukar )

Twitter picture

Anda sedang menulis komen melalui akaun Twitter anda. Log Out / Tukar )

Facebook photo

Anda sedang menulis komen melalui akaun Facebook anda. Log Out / Tukar )

Google+ photo

Anda sedang menulis komen melalui akaun Google+ anda. Log Out / Tukar )

Connecting to %s